Exposure values
| CAS number | 13463-39-3 |
|---|---|
| Current WES (to 30 Nov 2026) | 0.05 ppm (0.12 mg/m³) TWA |
| WEL (from 1 Dec 2026) | 0.05 ppm (0.12 mg/m³) peak limitation |
| Change | Limit reduced (stricter) |
| Notations, WES (to 30 Nov 2026) | none |
| Notations, WEL (from 1 Dec 2026) | none |
| Notation change | none |
| Other names | Tetracarbonyl nickel; Nickel carbonyl |
TWA: 8-hour time-weighted average. STEL: 15-minute short-term exposure limit. ppm values apply to vapours and gases; mg/m³ to all forms.
What to do in your register
- Record the new, lower WEL against this substance, to apply from 1 December 2026. The WES value applies until 30 November 2026.
- Compare any past air monitoring results with the new WEL, not the old WES. A result that was under the WES can be over the WEL.
- If exposure could be near the new limit, review your controls and think about whether air monitoring is needed before 1 December 2026.
- Match your register row by CAS number (13463-39-3) from section 3 of the safety data sheet (SDS), not by trade name.
Information only, not WHS or occupational hygiene advice. If you need to know actual exposures, talk to an occupational hygienist.
Check your whole register
Paste or upload your hazardous chemical register and see every substance whose limit changes on 1 December 2026. Free, and it runs in your browser: your register is never uploaded.
Source
Values for this substance: Safe Work Australia, Changes to Workplace Exposure Limits, effective from 1 December 2026 (comparison table last updated 29 May 2025). Full lists: Safe Work Australia WEL list, WES list and WES-to-WEL comparison table.
© Commonwealth of Australia (Safe Work Australia), licensed under CC BY 4.0. Changes: values machine-read from SWA's files, reformatted and combined into one WES-to-WEL comparison per substance. This site isn't affiliated with or endorsed by Safe Work Australia.
Dataset swa-2026-10-11, every value cross-checked against the PDF lists. Page generated 2026-10-12.